Best Mini PC For CAD: Top Picks And Buying Guide 2026

Top pick: GMKtec M3 Ultra i7-12700H for most CAD users.
If you run CAD, you likely want speed, silence, and a tiny footprint. You also want a machine that fits a small desk and a busy life. I have been there, juggling large assemblies and looming deadlines. A good mini PC makes it easy to move between office, site, and home. It pairs with a 4K monitor, runs cool, and handles complex 2D and light-to-mid 3D work. In this guide, I cut through the noise to help you find the Best Mini PC for CAD for your needs and budget.

GMKtec M3 Ultra i7-12700H, 32GB/1TB

The GMKtec M3 Ultra packs an Intel Core i7-12700H. That chip has high single-core speed and many threads. For CAD, that means fast sketching, smooth viewports, and snappy rebuilds. The 32GB RAM and 1TB NVMe SSD give you room for complex projects and quick file loads.

Iris Xe graphics are fine for 2D and light 3D assemblies. Triple 4K output works well if you use multiple monitors. Wi‑Fi 6 and Bluetooth 5.2 keep you connected to networks and devices. The compact case sits quietly on a shelf or VESA mount.

Pros:

• Strong i7-12700H performance for CAD modeling
• 32GB RAM is ready for large drawings
• Fast 1TB NVMe SSD for quick open and save
• Triple 4K display support for big workspaces
• Quiet and compact for small desks
• Modern Wi‑Fi 6 and BT 5.2 connectivity

Cons:

• Iris Xe is not for heavy GPU rendering
• Not as upgrade-friendly as a full tower
• Thermals can rise under long, heavy loads

My Recommendation

If you want the Best Mini PC for CAD in a small box, this is my top pick for most users. It balances CPU speed, memory, and storage. It handles 2D CAD, light FEA, and small-to-mid 3D assemblies well. If you do real-time ray tracing or massive datasets, you may need a workstation GPU, but for most, this hits the sweet spot.

Best for	Why
General CAD pros	Fast i7 CPU and 32GB RAM keep projects smooth
Multi-monitor setups	Triple 4K output for wide workspaces
Students and freelancers	Great power per dollar in a tiny shell

GMKtec N150 Mini PC, 16GB/512GB

This GMKtec model uses the Intel N150. It is a low-power chip for basic tasks. For CAD, it fits drafting, 2D sheets, and light part edits. The 16GB RAM and 512GB SSD help keep daily work responsive.

Dual HDMI supports two 4K screens at 60Hz. 2.5GbE and Wi‑Fi 6 offer fast network options. The size is tiny, so it hides behind a monitor. It is a budget choice for entry-level CAD work.

Pros:

• Very compact and energy efficient
• Good for 2D CAD and markups
• Dual 4K display support
• Fast 2.5GbE LAN for shared files
• Quiet for office and classroom use

Cons:

• Not suited for complex 3D assemblies
• Limited CPU headroom for rendering
• Integrated graphics only

My Recommendation

If you draft, review, and annotate, this tiny PC fits well. It is not the Best Mini PC for CAD for heavy modeling. But it is a smart buy for offices that handle 2D floor plans and simple parts. It also works great as a second station for print prep.

Best for	Why
2D drafting	Low power chip handles drawings smoothly
Budget users	Affordable with 16GB RAM and SSD
Dual display setups	Two 4K ports for side-by-side work

KAMRUI Pinova P2 Ryzen 4300U, 16GB/512GB

The Ryzen 4300U offers a nice jump over budget chips. It has capable single-core speed for many CAD tasks. It will run parametric parts and moderate assemblies with care. 16GB RAM and a 512GB SSD keep the system quick.

Triple 4K output helps when you need tool palettes and references open. You get HDMI, DP, and USB‑C video options. Wireless and Bluetooth are ready for modern devices. It is a solid mid-tier mini for CAD on the go.

Pros:

• Better CPU than entry-level models
• Triple 4K display support
• Good value for light-to-mid CAD
• Quiet operation and small size
• USB‑C display output adds flexibility

Cons:

• Not aimed at complex 3D with huge parts
• Integrated Radeon graphics only
• 16GB RAM is borderline for very large files

My Recommendation

Do you handle small assemblies, shop drawings, or fixtures? This is a nice match. It is not the Best Mini PC for CAD if you do heavy surfacing. But it is great for students, makers, and offices that want speed without bulk.

Best for	Why
Light 3D design	Ryzen 4300U has solid single-core speed
Multi-monitor users	Triple 4K makes space for tools
Portable CAD setups	Compact and easy to move

Beelink EQ14 N150, 16GB/1TB

The Beelink EQ14 uses the Intel N150. It is tuned for low heat and steady office use. It works for 2D CAD, takeoffs, and markups. The big win here is the 1TB SSD, which holds many projects.

Dual HDMI 4K at 60Hz is handy for displays. You also get dual Gigabit LAN for network needs. Wi‑Fi 6 and Bluetooth 5.2 are standard. It is a dependable basic CAD station for teams.

Pros:

• 1TB SSD offers plenty of local storage
• Dual HDMI 4K support
• Dual LAN can help in office networks
• Low power and low noise
• Good for 2D CAD and documentation

Cons:

• Limited power for 3D-heavy workflows
• Not ideal for simulation or rendering
• RAM not as high as pro needs

My Recommendation

If your day is drawings, details, and prints, this fits well. It is not the Best Mini PC for CAD for complex models. But it is easy to manage and great for shared stations. The extra storage is a nice perk at this price.

Best for	Why
2D documentation	Stable N150 performance and dual 4K
Shared office PCs	Dual LAN and solid reliability
Local file storage	Large 1TB SSD for projects

KAMRUI Pinova P1 Ryzen 3300U, 16GB/256GB

The Ryzen 3300U is an older but capable chip. For basic CAD, it still holds up in 2026. It will run part modeling and small assemblies with care. 16GB RAM helps, though the 256GB SSD is modest.

Triple 4K support adds flexibility with displays. You get USB‑C, HDMI, and DP. Wi‑Fi and Bluetooth cover the basics. It is a starter mini PC for learners and light CAD users.

Pros:

• Affordable path into CAD
• Triple 4K display options
• Compact and quiet
• Decent CPU for simple models
• USB‑C adds modern I/O

Cons:

• 256GB SSD fills up fast
• Not for heavy 3D or renders
• Older CPU generation

My Recommendation

If you are new to CAD or retraining, this makes sense. It is not the Best Mini PC for CAD for professionals. But it is fine for lessons, trials, and small projects. You can add external storage to expand space.

Best for	Why
Students	Low cost and enough power for basics
Home tinkerers	Triple display for tutorials and tools
Light modeling	Ryzen 3300U handles simple parts

GMKtec G10 Ryzen 5 3500U, 16GB/512GB

The Ryzen 5 3500U is a step up over entry chips. It has better burst speed for CAD viewports. You get decent single-core and enough threads for multitasking. 16GB RAM and 512GB SSD make it a smooth daily driver.

Triple 4K display support helps with complex layouts. HDMI 2.1, DP, and USB‑C give you options. The 2.5GbE LAN is great for network storage. It is a solid mid-range mini for CAD teams.

Pros:

• Good CPU balance for price
• Triple 4K displays for tool panels
• 2.5GbE for fast file access
• Compact and quiet running
• USB‑C PD support in many setups

Cons:

• Not for complex simulation or VR
• Integrated graphics limit heavy 3D
• Upgrade paths vary by model

My Recommendation

For small firms and makers, this fits. It is not the all-out Best Mini PC for CAD, but it is close for price. It runs most 2D and moderate 3D workflows well. Pair it with a fast NVMe and a clean OS for best results.

Best for	Why
Small studios	Triple display and 2.5GbE help workflow
Daily CAD tasks	Strong enough CPU for modeling
Budget-conscious pros	Good feature mix for the cost

Beelink ME Mini NAS N150, 2TB SSD

This Beelink is a twist. It is a mini PC that doubles as a NAS. It comes with a 2TB SSD and room for more drives. It is built to hold and share files fast.

The Intel N150 is basic for CAD. But as a file server for CAD teams, it shines. Dual 2.5G LAN helps with quick sync and backups. If storage is your pain point, this box helps a lot.

Pros:

• 2TB SSD included and six M.2 slots
• Dual 2.5G LAN for fast sharing
• Compact private cloud for teams
• Low power use 24/7
• Great for versioned backups

Cons:

• Not strong for modeling or rendering
• Setup may need network know-how
• Limited RAM for multitasking

My Recommendation

If you need a central hub for CAD files, this is ideal. It is not the Best Mini PC for CAD design work. But it can be the best partner for your main CAD PC. Your projects will load fast over 2.5G links.

Best for	Why
Team file storage	Built-in 2TB and room to grow
Fast local backups	Dual 2.5G LAN reduces wait time
Small offices	Compact NAS reduces clutter

Beelink SER3 Ryzen 3 3200U, 16GB/500GB

The Ryzen 3 3200U is entry level. It can run 2D CAD and basic 3D parts. You get 16GB RAM and a 500GB SSD, which is fair for light use. It is very small and quiet.

Dual HDMI 4K lets you stretch your workspace. It is a simple and reliable box for training and reviewing. I like it for shops that need low-cost stations. Keep expectations modest for 3D complexity.

Pros:

• Low cost for basic CAD
• Dual 4K monitor support
• Quiet and easy to place
• 16GB RAM helps with multitasking
• 500GB SSD is decent for starters

Cons:

• Not for complex assemblies
• Older CPU and iGPU
• Limited upgrade headroom

My Recommendation

Pick this if your workflow is simple. It is not the Best Mini PC for CAD for pros. But it helps students, interns, and fabrication teams who view and edit. Match it with cloud storage to expand capacity.

Best for	Why
Training labs	Affordable, quiet, and dual 4K
Drawings and markups	Enough speed for 2D tasks
Secondary stations	Good for viewing and quick edits

GMKtec M5 Plus Ryzen 7 5825U, 32GB/1TB

This is a strong option for CAD users. The Ryzen 7 5825U brings fast single-core and eight cores total. That helps with rebuilds, drawings, and light simulation. 32GB RAM and 1TB SSD let you push bigger projects.

Triple 4K, Wi‑Fi 6E, and 2.5GbE LAN make it flexible. Dual NIC can help with isolated networks. It stays quiet under normal loads. For many, this is the best mix of power and price.

Pros:

• Great CPU for CAD modeling speed
• 32GB RAM suits large files
• 1TB SSD is fast and roomy
• Triple 4K output for pro setups
• 2.5GbE and Wi‑Fi 6E are future-friendly

Cons:

• Integrated Radeon limits heavy GPU tasks
• Small chassis needs good airflow
• Premium price over entry models

My Recommendation

If you want the Best Mini PC for CAD under a tight space, this is a top runner. It handles most pro-level tasks except heavy GPU rendering. It is ideal for engineers, architects, and product designers. It offers near-workstation speed in a tiny case.

Best for	Why
Professional CAD users	Fast CPU and 32GB RAM boost workflow
Network-heavy teams	2.5GbE and dual NIC help file flow
Triple monitor rigs	Three 4K outputs support complex layouts

Blackview MP100 Ryzen 7430U, 16GB/512GB

The Ryzen 7 7430U is quick and modern. It has strong single-core speed that CAD loves. 16GB RAM is fine for many tasks, though 32GB is better for huge files. The 512GB SSD is fast for OS and core projects.

It can drive three 4K screens and even handle 144Hz on supported monitors. Wi‑Fi 6 and Bluetooth 5.2 keep latency low. The 3-year warranty adds peace of mind. This is a smooth and sturdy mini for design work.

Pros:

• Newer Ryzen CPU with great snappiness
• Triple 4K and 144Hz support
• Solid build and warranty
• Compact size with quiet fans
• Good value for modern specs

Cons:

• 16GB RAM may limit very large assemblies
• Integrated GPU not for heavy renders
• 512GB storage can fill fast

My Recommendation

If you want a modern chip and a long warranty, this is a strong pick. It is one of the Best Mini PC for CAD options for mid-size projects. Add RAM if the model allows, or use external storage. It balances speed, display support, and service well.

Best for	Why
Designers on the move	Fast CPU and compact build
Triple display users	Up to 3 displays and high refresh
Warranty-minded buyers	3-year coverage for peace of mind

FAQs Of Best Mini PC for CAD

Do I need a dedicated GPU for CAD?

For 2D CAD and small 3D models, no. A fast CPU and enough RAM matter more. For massive assemblies or real-time ray tracing, a workstation GPU helps.

How much RAM is best for CAD?

16GB works for light tasks. 32GB is better for large drawings or big assemblies. Go 64GB if you run simulations or many apps at once.

Is storage speed important?

Yes. An NVMe SSD cuts load and save times. Aim for at least 512GB, with 1TB ideal for active projects.

What CPU specs matter most?

High single-core speed helps rebuilds and sketches. More cores help with multitasking and some exports. Modern U or H-series chips work well.

Can a mini PC run three monitors?

Many can. Look for HDMI, DisplayPort, and USB‑C outputs. Check if they support triple 4K at 60Hz.

Final Verdict: Which Should You Buy?

The GMKtec M3 Ultra is my top Best Mini PC for CAD pick for most people. It has fast CPU speed, 32GB RAM, and room for growth.

Need pro power at a fair price? The GMKtec M5 Plus and Blackview MP100 stand out. For entry 2D work, the N150 and SER3 models are fine.