Although scratching a stained sink may seem like a difficult task, one of the main dangers of failing to scratch your stainless sink is causing it to rust or even developing permanent scratches.
Remember piling too many utensils in your sink is one of the causes of scratches on your kitchen sink. Another cause of scratches is during transportation and offloading when it might come into contact with other rough objects, mainly when it is not in stable packages. This challenge posed the need to develop a sincere guide on how you can remove such scratches from your sink.
- 1 Step by step procedure on how to remove scratches from your sink.
- 1.1 The main causes of scratches in stainless sinks
- 1.2 How can you remove /clean scratches in a stainless steel sink?
- 2 Final verdict.
Step by step procedure on how to remove scratches from your sink.
It is essential to understand what causes scratches in your stainless sink even before you can learn how to remove them. Below are some of the several factors that facilitate scratches developing on your stainless sink? They include the following but not limited to:
The main causes of scratches in stainless sinks
- Accumulating too many rough utensils such as forks, knives, spoons, cup among others in your sink
- Using a powerful bleaching agent such as chlorine compounds while washing your appliances or the pan itself.
- Applying powerful abrasive cleaners in your pan while most stainless sinks require a soft material for cleaning. For instance, the use of a soft cloth is highly encouraged while cleaning your drain.
- Sink that comes with steel brushes is more prone to scratches than those without such brushes.
- Using your sink in the reverse direction of the grains.
- Regular usage of steel wool which might end up causing permanent scratches on a stainless sink.
How can you remove /clean scratches in a stainless steel sink?
Do you know your sink is one of the most used items in your kitchen? The regular usage makes it prone to accumulate a lot of dirt within a short time, and therefore, regular cleaning becomes inevitable.
It is from this frequent cleaning makes your sink develop scratches. How you can remove scratches from a stainless sink is explained below. There are two main categories of scratches.
- Severe and major scratches
- Minor/small scratches.
In any case, removing them is not an option. There are three main ways of removing scratches from your sink. They include
- Using a sandpaper.
- Using an advanced scratch remover.
- Using a cleaner.
The first method. Using sandpaper to get rid of the scratches.
It is one of the most widely used methods of removing scratches, especially if the scratches are intense and noticeable. Remember, gentle scratching isn’t needed since the use of too much pressure may end up causing more scratches. Ensure to rub your sandpaper gently against the surface of the sink. Moreover, establishing the general grain of your sink flow is very important to give you a clue of how much pressure to apply. You can now use the minimum pressure possible until all scratches are filled up.
It is recommendable to use the long streaks to save your precious time since the shorter stripes might force you to spend much time before filling up all the scratches on your sink. Note, the use of sandpaper isn’t the best method for removing light scratches on your sink since it might end up causing more scratches. Lighter types of sandpapers are recommended for eliminating shallow scratches, particularly in bright pads.
The second method: Using scratch remover method.
This method is the overall most commonly used technique of removing scratches from a stainless steel sink. Most scratch removers are effective in eliminating severe scratches although note that not all scratch removers are valid for all sink types. You need to understand which scratch remover is suitable for cleaning a particular sink. Online sources have some of the best guides that can help you purchase the best scratch remover for your sink and then keenly study the sinks manual to get more information on how to use it.
Remember, the best outcomes are only attainable through following the guideline indicated on the package. Ensure to follow the grain direction when cleaning since doing anything against that might lead to more damages than good on your sink—for instance, the manufactures instructions about the general direction of the specific grain you are using. Moreover, a close analysis of your sink can help you understand the grain flow.
How to use the scratch remover method.
- On the grid pad, apply the right amount of your scratch remover. Ensure to estimate the appropriate amount to avoid spraying more or less than the required amount.
- Bring your grip pad immediately to scratch before the remover dries up.
- While following exactly the grain of your sink, gently scrub the grid pad and ensure to use moderate or medium pressure since too much pressure can result in damaging the sink. Scrub consistently until all the scratches disappear.
- As you finish, use a soft piece of cloth. On the surface of this cloth, splay your remover and gently scrub the scratches completely disappears. Remember the shifting from rough grip pad to a soft cloth requires accurate judgment. For instance, some extent of the scratches and the manufacturer specification can guide you when to shift from one technique to another. Excess scrubbing may end up damaging the surface of your sink. Ensure to rinse all the remover thoroughly after you are through eradicating the scratches. You can use a soft piece of cloth to dry up any water.
The third method: using a cleaner to get rid of shallow scratches on the stainless steel sink.
It is an effective method to remove light scratches. The standard sink washing soap can be useful when dealing with this problem. On a piece of a cloth, apply the solvent and use it scrub against the scrubs and ensure to follow the grain of the sink. Only gentle and minimum pressure is needed when scratching but remember to apply an appropriate amount of cleaner. Moreover, ensure to give your filter an adequate time to dry up as it would otherwise cover up all the scratches. The proper time to wait depends on the type of clear you use so ensure to follow the manufactures instructions.
Once the cleaner soap has thoroughly dried up, rinse it off using plenty of adequate water.
Using a rag is also an effective way of removing all the dry cleaner and ensuring the best results. The dried soap should have the ability to remove all the scratches from your sink. You can try a different, but a more robust cleaner is the current one didn’t remove the scratches to your satisfaction. If no better results are attained despite the use of a more robust filter, you can try a different method like the use of a sandpaper method.
Scratches in your sink doesn’t not only make your sink look untidy but also they are themselves great eyesore. It is therefore essential to remove them as soon as you notice them, but the crucial thing should be protecting your sink from items that can cause scratches. There are three main ways you can get rid of such scratches in your sink, so choose the appropriate method depending on the magnitude of the scratches. Keenly follow the proper procedure to ensure better results at the end of your exercise. Remember to keep your sink healthy at any given time.